permanent damage may occur if any of these limits are exceeded. maximum ratings operating temperature -55c to 85c storage temperature -55c to 100c absolute max. supply voltage (vcc) 5.6v absolute max. tuning voltage (vtune) 7.0v all specifcations 50 ohm system rev. a m152326 edr-9804f2 zx95-2536c+ rav 150923 page 1 of 2 electrical specifcations coaxial voltage controlled oscillator zx95-2536c+ case style: gb956 connectors model sma ZX95-2536C-S+ ? r & d ? lab ? instrumentation ? industrial scientifc and medical ? wimax ? td-scdma / hsdpa applications ? low phase noise ? low pulling ? low pushing ? protected by us patent 6,790,049 features 5v tuning for pll ic's 2315 to 2536 mhz model freq. power phase noise tuning non harmonics pulling pushing dc no. (mhz) output dbc/hz ssb at offset harmonic (dbc) pk-pk (mhz/v) operating (dbm) frequencies,khz voltage sensi- port 3 db spurious @12 dbr power range tivity cap modulation (dbc) (mhz) typ. (v) (mhz/v) (pf) bandwidth vcc current (mhz) (volts) (ma) min. max. typ. 1 10 100 1000 min. max. typ. typ. typ. typ. typ. max. typ. typ. max. zx95-2536c+ 2315 2536 +6 -75 -105 -128 -148 0.5 5 57-77 13.6 70 -90 -18 -10 2.5 2.5 5 45 outline drawing outline dimensions ( ) inch mm a b c d e f g h j k l m n p q r s t wt. 1.20 .75 .46 1.18 .04 .38 .38 .57 .18 .33 .21 .22 .18 1.00 .50 .35 .18 .106 grams 30.48 19.05 11.68 29.97 1.02 9.65 9.65 14.48 4.57 8.38 5.33 5.59 4.57 25.40 12.70 8.89 4.57 2.69 35.0 http:// www .minicircuits .com/app/an40-010.pd f http:// www .minicircuits .com/app/an40-010.pd f http:// www .minicircuits .com/app/an40-010.pd f note: when soldering the dc connections, caution must be used to avoi d overheating the dc terminals. see application note an-40-10 . ! notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
performance data & curves* page 2 of 2 *at 25 o c unless mentioned otherwise zx95-2536c+ zx95-2536c+ frequency and tuning sensitivity 2240 2300 2360 2420 2480 2540 2600 2660 0 1 2 3 4 5 tuning voltage (v) frequency (mhz) 20 30 40 50 60 70 80 90 tuning sensitivity (mhz/v) freq. @ -55c freq. @ +25c freq. @ +85c t.sens @ +25c zx95-2536c+ power output 4.0 4.5 5.0 5.5 6.0 6.5 7.0 0 1 2 3 4 5 tuning voltage (v) output power (dbm) -55c +25c +85c zx95-2536c+ frequency pulling & pushing (vcc 5%) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 1 2 3 4 5 tuning voltage (v) pushing (mhz/v) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 pulling (mhz) pulling pushing zx95-2536c+ phase noise vs. tuning voltage -160 -150 -140 -130 -120 -110 -100 -90 -80 -70 0 1 2 3 4 5 tuning voltage (v) phase noise (dbc/hz) 1khz 10khz 100khz 1mhz zx95-2536c+ phase noise -160 -150 -140 -130 -120 -110 -100 -90 -80 -70 1 10 100 1000 frequency offset (khz) phase noise (dbc/hz) zx95-2536c+ harmonics level -60 -50 -40 -30 -20 -10 0 1 2 3 4 5 tuning voltage (v) harmonics (dbc) f2 f3 f4 v tune frequency power output icc harmonics (dbc) freq. freq. phase noise (dbc/hz) freq phase tune sens (mhz) (dbm) (ma) push pull at offsets offset noise at (mhz/v) (mhz/v) (mhz) (khz) 2432 mhz -55 c +25 c +85 c -55 c +25 c +85 c f2 f3 f4 1khz 10khz 100khz 1mhz (dbc/hz) 0.00 81.90 2267.6 2257.4 2249.2 5.54 5.14 4.51 36.63 -21.7 -19.0 -36.6 2.44 3.28 -77.7 -104.8 -127.5 -147.0 1.0 -75.73 0.50 74.61 2306.7 2297.3 2289.5 5.76 5.23 4.62 37.11 -30.5 -20.4 -35.5 1.96 0.44 -76.2 -105.1 -128.0 -147.9 2.0 -84.74 0.75 73.96 2325.2 2315.9 2308.2 5.87 5.27 4.67 37.29 -36.1 -21.6 -35.4 1.65 1.90 -76.2 -105.7 -128.6 -148.2 3.5 -93.54 1.00 73.76 2344.0 2334.4 2326.4 5.86 5.32 4.77 37.45 -32.0 -22.3 -36.4 1.49 2.67 -75.5 -105.6 -128.2 -147.6 6.0 -99.82 1.25 73.75 2362.7 2352.9 2344.6 5.86 5.38 4.83 37.57 -28.6 -22.4 -37.9 1.42 2.27 -77.8 -105.5 -128.7 -148.3 8.5 -103.77 1.50 74.01 2381.6 2371.3 2362.6 5.87 5.43 4.92 37.67 -25.6 -22.5 -39.9 1.37 1.25 -77.6 -105.5 -128.7 -148.4 10.0 -105.41 1.75 74.71 2400.7 2389.8 2380.6 5.87 5.52 5.03 37.73 -23.5 -23.3 -41.2 1.38 1.27 -76.5 -105.6 -128.9 -148.5 20.8 -113.60 2.00 74.15 2419.7 2408.5 2398.9 5.89 5.58 5.12 37.80 -22.2 -23.5 -44.0 1.41 2.83 -77.1 -105.6 -128.9 -148.4 35.5 -118.96 2.25 73.21 2438.5 2427.0 2417.2 5.90 5.62 5.21 37.87 -20.8 -23.5 -43.4 1.51 2.86 -76.1 -105.9 -128.8 -148.6 60.7 -124.10 2.50 71.91 2456.9 2445.3 2435.4 5.92 5.69 5.28 37.92 -20.0 -23.9 -43.5 1.75 1.53 -76.5 -105.6 -128.7 -148.8 85.2 -127.31 2.75 70.82 2475.0 2463.3 2453.3 6.00 5.73 5.33 37.95 -19.5 -24.7 -43.9 2.12 1.51 -75.3 -104.9 -128.6 -148.1 100.0 -128.68 3.00 68.45 2492.6 2481.0 2471.1 6.01 5.80 5.40 37.97 -18.5 -25.3 -44.9 2.58 3.12 -76.0 -104.4 -128.3 -148.6 142.9 -131.46 3.25 65.44 2509.4 2498.1 2488.3 6.09 5.87 5.44 37.99 -17.9 -25.3 -45.0 3.09 2.95 -74.7 -104.6 -128.1 -148.7 167.8 -133.29 3.50 61.36 2525.2 2514.5 2504.9 6.16 5.91 5.54 38.02 -17.3 -27.7 -46.3 3.65 1.69 -76.0 -104.2 -128.2 -148.0 200.6 -134.52 3.75 57.60 2540.3 2529.8 2520.7 6.18 5.97 5.58 38.06 -16.8 -27.5 -47.3 4.08 1.15 -75.5 -103.9 -128.4 -147.5 281.6 -137.84 4.00 53.56 2554.4 2544.2 2535.4 6.26 6.01 5.66 38.06 -16.3 -30.1 -48.7 4.52 2.96 -77.2 -103.4 -128.0 -147.9 330.7 -138.85 4.25 50.01 2567.6 2557.6 2549.0 6.30 6.08 5.70 38.06 -16.1 -31.4 -49.8 4.84 3.53 -77.3 -103.2 -127.7 -147.8 464.2 -141.63 4.50 45.62 2579.9 2570.1 2561.7 6.33 6.10 5.76 38.05 -15.6 -33.0 -49.1 5.01 3.11 -77.3 -103.3 -127.8 -148.3 554.9 -143.78 4.75 41.10 2591.0 2581.5 2573.3 6.38 6.15 5.79 38.05 -15.5 -37.8 -50.1 5.07 2.11 -76.0 -103.0 -127.6 -148.2 914.6 -147.64 5.00 36.26 2601.0 2591.8 2583.8 6.40 6.17 5.83 38.06 -15.2 -35.9 -51.1 4.89 0.87 -75.8 -103.4 -128.1 -148.4 1000.0 -148.33 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|